30W Power Overclocking Mode Rapid Cooling
The RedMagic mobile phone cooler with a peak power of 30W and rated power output exceeding 24W, cooling pad gets ice cold instantly after activating. The mobile phone radiators cools down your phone to 17°C in 5s in a 25°C room, capable of achieving a maximum temperature drop of 41°C and a minimum temperature of - 16°C. It prevents thermal throttling, allowing you to maintain consistent frame rates and avoid performance dips. This is crucial for competitive gaming and smooth live streaming.

Graphene Powerful Cooling
RedMagic's innovative high thermal conductivity rich-graphene-aluminum material with sprayed graphene, which has a 54% improvement in heat conduction compared to aluminum. Coupled with the 3D through-type three-dimensional design, heat can be quickly conducted out without any residue, ensuring continuous temperature reduction without rebound.

Multi-device Support
Magnetic Cooler + Magnetic Sticker + Back Clip fit most devices. You could attatch this cooler to most device, such as iPhone /Android phones, iPads, tablets, laptop, cameras, nintendo switch, steam deck etc. iPhone 11 series and above can attached without magnetic stickers. Magsafe direct magnetic suction, non-magnetic suction phone can be used with magnetic suction sheet or clip. (Packages are attached with magnetic sticker and back clip).

Low Quiet Working
Equipped with self-developed 40*15mm 7 blade micro axis fan, it reduces the volume and increases the heat dissipation frequency. The air volume is increased by 20%, the heat dissipation efficiency is improved by 15% and the noise is reduced to 35db, allowing you to be fully immersed in the game even with the fan running at full speed. It is also recommended at the time of the voice chat and live broadcast, keep your phone cool even during long video sessions.

Customized High-density TEC & Dual-Layer Thermal Silicone
It adopts a 36*36*4.7mm high-density TEC, which increase by 34% than ordinary TEC. The size is smaller, however, the cooling efficiency is higher. With a thickness of 4.7mm. The unit cooling capacity is increased by 17%, enabling fast and efficient cooling. The heat conduction of the cooling surface of the composite heat-conducting silicone rubber material is increased by 34%. It is wear-resistant, anti-slip, dust-resistant and elastic. It fits closely, won't scratch phone.

Upgrade AI Temperature Control Safe Use
It built-in NTC temperature detection sensor, which can monitor the temperature in real time through AI. It can adjust the rotation speed and power according to the temperature conditions, effectively preventing the device from being damaged by condensed water, ensuring a safer and more worry-free usage experience.

RGB Neon Light Effect
It is equipped with 16 RGB ring lights with colorful breathing, the glazed soft light process, full of cool, futuristic and stylish touch. The light and fan blades illuminate each other to provide you an E-sports atmosphere. It can control through the app to set RGB lights 3 mode of Colorful, Breathing and Normally on, allowing you to customize the look to match your style or gaming setup.If you don't want the RGB lighting effects, you can also colse it by pressing the physical button on the side.

Support Control in APP
You can download the "Goper" APP through the QR code in the manual, and then connect the APP and the Phone Radiator via Bluetooth to set it up. It allows you adjust the fan speed on the cooler, the RGB lighting options and to control temperature. The APP compatible with iOS/Android phone system. (Note: It requires plugging in and comes with a Type-C cable)